A “improved” shaving mug and a stray idea for a modern application

A lot of inventions aim at improving something that is already simple and functional, often to solve imaginary or minor problems. The improved shaving mug that David Heston patented in early 1875 do have some potential though… more about that later.

Having observed that the common shaving mug of the day was made for having a soap in the bottom, and therefore was fairly large and made it awkward for travel and storage, Mr Heston invented and patented one that was modular… in his own words:

…a shaving cup of detachable sections. It also consists in a soap-receptacle made detachable from the body of the cup, and constituting an integral portion thereof.

Mr Heston was limited by the technology of his time, so the drawing shows a bayonet joint between the soap cup and the shaving mug proper – today we would likely use threads instead, and indeed Mr Heston points that out as an alternative.

It will be seen that the cup may be easily produced, and for transportation packed in small compass. Provision is also made for filling the lower receptacle U with soap or shaving compound without. introduction through, or independent of, the top portion B, and the entire inner face of the cup is most readily accessible for purposes of cleansing.

Or in short: Simple to make, simple to transport, easy to put the soap in the bottom part, easy to clean the top part.
Looking at this patent, it suddenly occurred to me that artisan and small scale manufacturers of shaving soap today often use plastic containers for their soaps of a standardised size… either standardised across their own range, or even across several makers (I assume this is due to sourcing their containers from the same place). This means that they could design a screw on shaving mug to fit their hard soaps… allowing modern shavers to enjoy the traditional way of using a shaving mug without taking up too much space in their den. Another option would be to sell a version of this with multiple bottom parts, so the enterprising shaver could fill the soap cups with the soap of his choice. I’m just tossing the idea out there the patent is long expired, so it’s a free for all.

Shave of the day 24th June

Razor: Gillette Slim
Blade: PolSilver Super Iridium
Brush: Semogue TSN LE 2012
Pre-Shave: The Lavish Gentleman Natural Strength Oil Cleanser
Lather: Pereira Oud
Aftershave: Nivea Cooling After Shave Balm
Additional Care: Alum Block, BullDog Original Beard Oil, & Pereira Shavery Boomerang Beard Comb

Shave of the day 21st June

Razor: Gillette 1958 TV Special
Blade: PolSilver Super Iridium
Brush: Artesania Romera Manchurian Badger, imitation horn
Pre-Shave: The Lavish Gentleman Natural Strength Oil Cleanser
Lather: Jabonman Mediterráno L.E. BullGoose
Aftershave: Myrsol Aqua Balsamica
Additional Care: Alum Block, Gentlemen of Sweden Original Beard Oil, & Pereira Shavery Boomerang Beard Comb

A 1937 safety razor sharpener

Dull blades? Or just finds blades too expensive to throw away, and need to expend the useful life of that sliver of steel? Fret not, because if it’s one thing people patented back in the day it is razor blade sharpeners…
One of the simpler ones was patented by Eric Muelberger Jr in 1937, and in the application he claimed that the existing sharpeners were both expensive and subject to mechanical wear and malfunctions… something he avoided by having no moving parts at all.

It is therefore my principle object to provide a non-mechanical safety razor blade sharpener which will not only resharpen the actual cutting edges of a blade but will simultaneously effect a hollow grinding of that portion of the blade immediately adjacent the cutting edges, the abrasive of the sharpener elements being arranged in permanent alignment.

No moving parts? Check.
Non-mechnical? Check.
Risk of slicing fingertips if you’re not careful? Check…

The upper and inner quarter of each abrasive element is formed with a curved convex surface and for the full length of the element, as at 3, for the purpose hereinafter described. The elements are spaced apart transversely such a distance that when a safety razor blade 4 is disposed lengthwise on said elements in the manner shown, the edges of the blade will rest upon such curved convex portion of the elements. In other words, the distance from center to center of the curved surfaces is the same as the width of the blades.

An important part of the idea was that blades shaved better if they were hollow-ground, something which Eric Jr achieved by careful shaping of the abrasive surface. It’s a very simple invention, at least by the standards of some of the other sharpeners I’ve seen – and I would be surprised if it didn’t see at least some production and sale during World War Two… after all, blades got harder to get hold of for the duration, and a simple, inexpensive means to keep them sharp would be welcome both at home and abroad.

Shave of the day 19th June

Razor: Gillette 1958 TV Special
Blade: PolSilver Super Iridium
Brush: Vie-Long #12705B
Pre-Shave: The Lavish Gentleman Natural Strength Oil Cleanser
Lather: Jabobman Mediterráno L.E. BullGoose
Aftershave: Barber No3 Marmara
Additional Care: Alum Block, Scotch Porter Beard Balm, & Pereira Shavery Boomerang Beard Comb

A 1849 self feeding shaving brush!

The idea of a self feeding shaving brush – in other words a shave brush that contains the shave cream in the handle – is old… older than I though. In my wanderings online I found this gem from 1849!

Be it known that I, WILLIAM S. Jewett, of New York, in the county of New York and State of New York, have invented a new and useful Shaving-Brush; and I do hereby declare that the following is a full, clear, and exact description of the construction and operation of the same…

The idea is simple enough in hindsight, consisting of a hollow handle with a twisty bottom, a  plate to push the shaving cream towards the knot, a short tube and that is about it. The patent have a single, simple drawing as well as a simple and straightforward explanation.

…a sectional or profile View of the brush, with the different parts, in which- A is the handle of the brush and also the box containing the soap which should be what is commonly called shaving cream. B, is the head of the left handed screw by turning which to the right the nut or button O, forces down the soap through the small metal tube E, into the brush. The tube E is :fixed on a thin plate D completely covering and protecting this end of the brush. The nut C should be covered with leather so that while .it fits closely the sides of the box the soap may be prevented from passing upward.

Simple, elegant, and – as history have shown us – doomed to failure and to be reinvented over and over again.

Shave of the day 17th June

Razor: Gillette 1958 TV Special
Blade: PolSilver Super Iridium
Brush: Vie-Long #14033
Pre-Shave: The Lavish Gentleman Natural Strength Oil Cleanser
Lather: Jabonman Mediterráno L.E. BullGoose
Aftershave: Barber No3 Marmara
Additional Care: Alum Block, BullDog Original Beard Oil, & Pereira Shavery Boomerang Beard Comb

Shave of the day 14th June

Razor: Parker 22R
Blade: PolSilver Super Iridium
Brush: Wilkinson Sword Badger
Pre-Shave: The Lavish Gentleman Natural Strength Oil Cleanser
Lather: GzD Shavestick
Aftershave: BullDog Original Aftershave Balm
Additional Care: Alum Block, BullDog Original Beard Balm, & Pereira Shavery Boomerang Beard Comb

A 1906 Gillette advertisement

While a 1906 advertisement for the Gillette razor and blades are interesting by itself, it’s interesting by itself (the Simplest, Easiest, and Most Satisfactory Shaving Device in the World? I’ll believe that at the time), it is also interesting to read the claims and prices… to compare and contrast.

The claim of 20 to 40 shaves per blade is in line with Gillette’s’ current claim of “up to a month” of shaves from their cartridges. The cost of 50 cents per pack isn’t too far of the price of carts either; taking inflation into account it cost the equivalent of about 14 USD.

Shave of the day 12th June

Razor: Parker 22R
Blade: PolSilver Super Iridium
Brush: Vie-Long #13051M
Pre-Shave: The Lavish Gentleman Natural Strength Oil Cleanser
Lather: Arko Shavestick
Aftershave: Barber No3 Marmara
Additional Care: Alum Block, BullDog Original Beard Oil, & Pereira Shavery Boomerang Beard Comb